Terasaki's catalogue picture of this product family; see the datasheet for exact details.
Terasaki 080517 Terminal Cover, Short, 3-Pole, for TemBreak 2 250A Frame MCCBs
- Brand:
- Terasaki
- Part number:
- 080517
Short-pattern terminal cover for one end of a 3-pole TemBreak 2 MCCB on the 250 A frame; two cover both ends. Terasaki part number 080517.
- Short-pattern cover, 3-pole, 250 A frame
- IP20 with 4 mm megger test holes
- Tool-free, fits top or bottom
- Two per breaker for both ends
Available to order
UK delivery £9.95 ex VAT, free on orders of £100 ex VAT or more; usually 3-5 working days.
Minimum order £50 ex VAT. All prices exclude VAT, which is added at checkout.
Project quantities or a lead time to check? Request a quote
Specifications
Electrical
| Poles / neutral | 3 pole |
|---|
Fit
| Fits device | Terasaki S250-NJ, Terasaki S250-GJ, Terasaki S250-NE, Terasaki S250-GE |
|---|---|
| Fits MCCB frame | 250 A |
| Panelboard range | Resilience Standard, Resilience PlusWhat does this mean?Incomer and outgoing ways in one wall-mounted board. 250 A or 400 A busbars, 4 to 18 outgoing ways, outgoing MCCBs up to 125 A, Form 3b Type 2, doors included. Modular: a separate incomer housing beside the panel board, with add-on enclosures and cableways. 400 A or 800 A busbars, 6 to 18 outgoing ways, outgoing MCCBs up to 250 A (400 A on the twin board), Form 3a or 3b Type 2, doors optional. |
Identification
| Brand | Terasaki |
|---|---|
| Part number | 080517 |
| Range | Terasaki TemBreak2 |
| Type | Terminal cover |
More technical data
| Type | terminal cover, short pattern, single |
|---|---|
| Poles | 3; frame: 250 A TemBreak 2 |
| Ingress protection | IP20 |
| Test access | 4 mm hole per phase |
| Fitting | tool-free, top or bottom |
| Not with | interpole barriers on the same breaker |
Product details
Terasaki 080517 is a short-pattern terminal cover for 3-pole TemBreak 2 MCCBs on the 250 A frame. One cover shrouds the terminals at one end of the breaker, keeping fingers and tools off live terminations and adding insulation between phases and to earth.
Key features
- One cover per pack; covering the line and load ends takes two
- Fits at either the top or the bottom of the breaker
- No tools needed to fit, as with all TemBreak 2 covers for the 125 A to 630 A frames
- IP20 over the terminals, with a 4 mm hole at each phase for megger testing in place
- Provision for an anti-tamper seal
Typical applications
Shrouding the terminals of 250 A frame breakers in switchboards and distribution boards, particularly where large conductors are terminated close together. The breakers in Resilience panel boards are front-connected; for a front-connected S250-NE or S250-GE, the matching front-connection (FC) cover is 080654, listed separately.
Listed for the TemBreak 2 S250-NJ, S250-GJ, S250-NE and S250-GE 3-pole breakers. Terminal covers and interpole barriers are alternatives: TemBreak 2 does not allow both on one breaker.
Add it to your cart, or ask us to confirm the right cover for your breaker's connection type.