Europa STBPH604020 IP65 Steel Pent Hood Enclosure 400 x 600 x 200 mm, Epoxy Coated
- Brand:
- Europa Components
- Part number:
- STBPH604020
- EAN:
- 5056551217904
Europa STBPH604020 IP65 epoxy powder coated steel pent hood enclosure with a 400 x 600 x 200 mm body. The sloping hood sheds falling water and dust away from the door, making it a good choice under pipework and in wash-down areas.
- IP65 steel enclosure with sloping pent hood
- Body 400 x 600 x 200 mm, epoxy powder coated
- Sheds falling water, dust and debris from the door
- For wash-down and overhead-pipework positions
- Genuine Europa, fast UK dispatch
3 in stock
UK delivery £9.95 ex VAT, free on orders of £100 ex VAT or more; usually 2-3 working days.
Minimum order £50 ex VAT. All prices exclude VAT, which is added at checkout.
Project quantities or a lead time to check? Request a quote
Specifications
Protection
| IP rating | IP65 |
|---|
Dimensions
| Size (W x H x D) | W 400 x H 600 x D 200 mm |
|---|
Construction
| Enclosure material | Sheet steel |
|---|---|
| Door / lid | Plain door |
| Doors | Single door |
| Box type | Pent-hood enclosure |
Fit
| Mounting | Surface / wall |
|---|
Identification
| Brand | Europa Components |
|---|---|
| Part number | STBPH604020 |
| EAN | 5056551217904 |
| Range | Europa STBPH |
More technical data
| Body dimensions | 400 mm wide x 600 mm high x 200 mm deep |
|---|---|
| Construction | epoxy powder coated steel with integral pent hood |
| Protection | IP65 to EN 60529 |
| Mounting | wall mounting only - not suitable for floor mounting |
Product details
Choose the Europa STBPH604020 where a 400 x 600 x 200 mm IP65 steel enclosure sits beneath pipework, gantries or a wash-down line and needs the extra shelter a pent hood provides.
Key features
- Sloping pent hood sheds water, dust and debris away from the door and seal
- IP65 to EN 60529, epoxy powder coated steel construction
- Wall-mounting format for switchgear, control gear and distribution equipment
- Suited to positions under pipework, gantries and wash-down lines where drips and falling dirt are the problem
- Not suitable for floor mounting, per Europa's published guidance
Typical applications
Pent hood enclosures earn their place wherever something above the enclosure drips, sheds dust or gets hosed down: food and drink production, bottling and packing halls, water and waste treatment, car washes, workshops under mezzanines and plant rooms with overhead pipework. Inside, they house the same gear as any wall-mounting steel enclosure - isolators and starters, contactor and relay assemblies, control stations, PLC and instrument marshalling, and small sub-distribution. Two limits are worth knowing before you specify: the powder coated finish needs regular upkeep once it is exposed to the weather, and Europa rules the range out where chlorides, sodium or acids are in the air, or in salty coastal conditions. Those jobs belong to the stainless SSTB range. Wall mounting only, too - these are not floor-standing enclosures.
Compliance
IP65 to EN 60529 means the enclosure is dust-tight and protected against low pressure water jets from all directions, with limited ingress permitted under the standard. Any surfaces cut or drilled during installation must be treated to prevent rust, and all swarf and filings removed before the enclosure is put into service.
Order today for fast UK dispatch, or call us for advice on sizing and accessories.
